How to Thaw Frozen Pipes: A Step-by-Step Guide

Even when outdoor temperatures start to drop, people can generally count on cozier conditions in their homes. So, it’s all the more frustrating when winter manages to sneak inside and cause trouble. A particularly frustrating problem is when the pipes of your plumbing system freeze over. Handling frozen pipes can range from inconvenient to a widespread, costly mess. 

Many people prefer to call their plumber to handle frozen pipes, and that’s never a bad idea. But you can also thaw them out yourself with just a few items from around the house. To help you resolve this annoying plumbing problem, here’s a step-by-step guide for thawing frozen pipes. 

Step 1: Locate the Frozen Pipes 

The first and sometimes most time-consuming step is locating the frozen pipes. Turning on all your faucets could help you narrow down likely locations. If one faucet isn’t running, you can follow those specific plumbing lines and hopefully reach the frozen pipes. The pipes themselves might not be obvious to spot unless ice is visibly covering them. 

Instead, you can run your hands along the plumbing until you feel a sudden drop in temperature. Once you’ve found where the plumbing is coldest, you’ve likely found the frozen pipes. 

This method won’t work if every faucet isn’t running. You’ll want to check the main water line at this point as it’s the source of your home’s water supply. Each set of plumbing lines will gradually lead back to the water main. You’ll probably find yours in the basement or crawlspace. But if your home doesn’t have either of those things, check near the water heater or in the garage next. If you still can’t find it, locate your home’s water meter on an exterior wall, as the main line can often be found on the other side. 

Step 2: Flush Your Plumbing System 

After confirming the pipes are frozen, turn off the main water supply. You can’t thaw the pipes with ice cold water on the inside, so you’ll also want to run every faucet if you haven’t already. This flushes the remaining water from the plumbing. Toilets will need to be flushed as well. 

Once the plumbing is drained of water, it’s time to start the thawing process. Gather a few things before you begin: 

  • A source of heat: This could be a hair dryer, a heat lamp, a heating pad or even just a bucket of hot water. 
  • Some towels or cloths: Spare rags can help transfer heat onto the frozen pipes. Or, if the pipes have broken, they can help you mop up. 

Step 3: Use Slow, Even Heat 

You shouldn’t heat up the pipes too quickly, as that could damage your plumbing. Depending on your heat source, prioritize the edges of the frozen area. This keeps the process slow and consistent. Also, try to heat the pipes closest toward the nearest kitchen or bathroom faucet. If any steam or water is produced by the heating process, it’ll escape in that direction. 

Gently inch your way along the pipe, heating sections one at a time. Some homeowners will also turn up their thermostats, using the warmer air to evenly thaw all the pipes silmultaneously. As long as this is done slowly, it shouldn’t be a problem. With any luck, you’ll have successfully thawed your frozen pipes. But there’s one more step to complete. 

Step 4: Reopen the Water Main and Check for Leaks 

Head back to the water main. Open the supply line, but only a little. This delivers enough water to check for leaks without causing a mess. A leak will be fairly obvious to find, and you should shut the water main off again if you do. At this point, it’s usually best to look for a plumber. They’ll have the tools and experience to take care of the damage, including replacing the broken pipes. 

If there’s not a leak, however, you can open the main water line the rest of the way before getting to all the faucets. 

Frozen Pipe FAQ 

Sometimes thawing out frozen pipes is a little more complex. Let’s go over some of the most likely complications and what you can do to work around them. 

How long should it take to drain a frozen pipe? 

30 to 45 minutes is a good average, with more serious icing requiring more time. Don’t try to speed the process up with more heat as this can damage the plumbing and make the problem worse. 

What should I do if a pipe bursts or leaks? 

Without the right tools and experience, it’s smarter to reach out to a trusted plumber in Fort Lauderdale. Not only can they repair things more quickly and effectively, but they’ll have a better chance of noticing if other plumbing problems are nearby. 

How can I reach frozen pipes if they’re behind walls? 

A lot of your plumbing is sitting behind walls, making them especially tricky to thaw out. Heating the nearest accessible area may work, or you could try heating the section of the wall closest to the frozen pipes. Heat lamps and your thermostat will be the best options. If these don’t work, you may have to pop out a section of the wall to get close enough to begin the thawing process. 

How to Prevent Pipes from Freezing 

The best way to thaw frozen pipes is to stop them from icing over in the first place. Pipes closest to unheated spaces or the outside of your home are at the most risk. It’s not impossible for other pipes to freeze over, but this is less likely as they’re probably close to insulation or between the floors of your home where it’s warm. 

Here are some things you can do to lower the risk of pipes freezing: 

  1. Keep your home warmer than 55 degrees: You’ll almost certainly prefer warmer temperatures than this, but 55 degrees or more is a good rule of thumb if you won’t be home. 
  1. Insulate your pipes with electric pipe heat tape or insulation wrap: These materials keep pipes warm, significantly reducing the risk they’ll freeze over. 
  1. Keep a small amount of water trickling through the plumbing: Flowing water is much more difficult to freeze than still water. You’ll want to do this with every faucet, and your water bill shouldn’t spike. 
  1. Open cabinets and other doors to ensure even heat distribution: Closed doors and cabinets are surprisingly good at keeping heat out. Leave these open in severe cold to keep warm air moving freely. 

If you stick to these steps, you’ll either keep pipes from freezing or have a straightforward way of thawing them out. If you’d prefer to leave the work to a professional, call your nearest plumber in Fort Lauderdale. They’ll make sure your plumbing is taken care of safely. 

Savings For You

See All Offers Here >
plumbing icon

$99 WATER HEATER FLUSH & SAFETY INSPECTION

  • Flushing the built-up sediment and minerals helps extend service life and reduce risk of failure and extensive water damage
  • Can improve water quality and consistency of hot water
  • Identifies potential safety hazards, like water leaks or gas line issues

Hurry! Offer ends January 31, 2025.

print
Offer

10% OFF FOR ACTIVE DUTY OR VETERANS

THANK YOU FOR YOUR SERVICE!

10% OFF Any Product or Service*
For all Active-Duty, Retired, and Veteran Military Personnel 

  • It’s our way of thanking you for your courage, dedication, and sacrifice to protect our freedom
  • All worked performed by licensed experts, and backed by a written, 100% Satisfaction Guarantee

Service Experts is proud to be affiliated with Military Makeover and Hiring Our Heroes

print

© 2024 Service Experts, Service Experts Heating & Air Conditioning, and the Service Experts logo and design are registered trademarks of Service Experts LLC and used under license by SE Canada Inc. All Rights Reserved. *Not applicable to the Advantage Program. See your signed Advantage Program Agreement for full details and exclusions. 100% Satisfaction Guarantee is subject to certain restrictions and limitations as set forth in the applicable Terms and Conditions.

Chat with a Service Experts Professional